GUANGZHOU LANDTEK

INSTRUMENT CO., LTD
Product Detail
Share to:
Textile Hardness Tester HT-6510T-5
Spec: To measure the winding density (hardness) of textile  bobbins, beams, spools, cones, dye packages etc.
Original: 0.00
Detail

 Features

* Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater than 400mm.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use USB data output to connect with PC.
* Provide Bluetooth data output choice.

 Principle

The principle used to measure textile hardness is based on measuring the resistance force of the penetration of a ball against the spool under a known spring load. The measuring principle is the same as for the Shore A hardness test.

 

 Downloads

  TextilehardnessTester_HT-6510T-5_Catalog

  HT-6510T-5_EN_Manual

  RS232Software

NOTE: The name of RS232 Software is 'RS232_EN_4.0.rar' after downloading. Just decompress 'RS232_EN_4.0.rar' with Decompress Software, Enter password:www.landtek.cn. a folder named 'RS232_EN_4.0' is abtained. There are RS232 Software and install instruction inside the folder.

Login
Login
My Profile
leave a message
back to the top